The Ultimate Guide On How To Fix Torn Drywall Paper

If you have a hole in your drywall, don’t worry! You can fix it yourself using this easy guide. In just a few simple steps, you can repair the damage and have your wall looking good as new.

Tools Required For Fixing Drywall Paper

The first thing you’ll need to do is gather the tools required for the job. For this repair, you’ll need a putty knife, a utility knife, sandpaper, and a piece of drywall.

Drywall Sander

You can purchase a drywall sander at any hardware store. This tool will make the job much easier and will help to ensure a smooth finish.

Utility Knife

A utility knife is necessary for cutting the drywall paper. Be sure to get one with a sharp blade so that you can make clean, straight cuts.

Putty Knife

A putty knife is used to apply the joint compound. You’ll need a small, medium, and large size to account for different-sized holes.

Drywall Saw

A drywall saw is optional but can be helpful if you need to cut out a large section of drywall.

Dust Mask

Since you’ll be doing a lot of sanding, it’s a good idea to wear a dust mask to avoid inhaling any particles.

Screw Gun

If your drywall is held up by screws, you’ll need a screw gun to remove them. Once the screws are out, you can start repairing the hole.

Materials Required

The next thing you’ll need to do is gather the materials required for the repair.

Drywall Patch

You can purchase a drywall patch at any hardware store. Be sure to get one that is the same thickness as the drywall you’re repairing.

Joint Compound

A joint compound is used to fill in the holes and seams. You’ll need a small, medium, and large size to account for different-sized holes.

Drywall Tape

Drywall tape is used to reinforce the seams. Be sure to get a roll that is at least 2 inches wide.


You’ll need sandpaper to smooth out the joint compound once it’s dry. Be sure to get a variety of grits, including coarse, medium, and fine.

Fix & Repair Torn Drywall Paper 

Once you have all of the necessary tools and materials, you’re ready to start repairing your drywall. Follow the steps below to get the job done.

Step 1: Remove Loose Paper With A Utility Knife

If the paper is torn or loose, use a joint knife to remove it. Be sure to make clean, straight cuts so that the new piece of drywall will fit properly. You can also use the utility knife to score the paper so that it’s easier to remove.

Step 2: Seal The Exposed Plaster Of Paris

Once the paper is removed, you’ll need to seal the exposed plaster of Paris with a coat of joint compound. This will prevent the plaster from crumbling and falling off. Plaster of Paris is a fine powder that is mixed with water to create a putty-like substance. It takes time to dry, so be sure to follow the instructions on the package. You can also use drywall primer or sealer to absorb any moisture from the plaster.

Step 3: Cover With Grout

After the joint compound has dried, you’ll need to cover the area with grout. Grout is a type of putty that is used to fill in gaps and cracks. It’s important to choose a color that matches the surrounding drywall so that it’s not noticeable. 

Step 4: Sand The Area

Once the grout has dried, you’ll need to sand the area smooth with sanding sponges. Be sure to use a variety of grits so that you don’t miss any spots. Start with coarse grit and work your way up to fine grit. You can use 120 grit for the initial sanding and then move up to 220 grit.

Step 5: Apply Another Layer Of Grout

After sanding, you’ll need to apply another layer of grout. This time, you’ll want to use a color that is close to the surrounding damaged drywall. Once the grout has dried, you can sand it on a smooth surface with 220 grit sandpaper.

Step 6: Color The Drywall

Once the grout has dried, you’ll need to color the drywall of the damaged area. You can use a variety of colors to match the wall looked like the surrounding drywall mud. Be sure to use a thin coat of primer or sealer to prevent paint color from bleeding through.

Drywall Paper Repair Tips

Here are a few tips to keep in mind when repairing drywall paper:

Use The Right Compound For The Job

There are a variety of joint compounds available, so be sure to choose the right one for the job. If you’re repairing a small hole, you can use spackle. For larger holes, you’ll need to use a joint compound.

Seal Any Exposed Drywall Paper

If you’re patching a hole that has exposed gypsum in torn drywall paper, be sure to seal it with joint compound before applying primer to attach the patch. This will prevent the plaster from crumbling and falling off. You need to let the joint compound or primer dry completely before proceeding to repair torn drywall paper.

Feather The Paint To Minimize Flashing

After you’ve applied the final layer of joint compound, you’ll need to feather the paint to minimize flashing. Flashing is when the new coat of paint reflects light and creates a shiny surface. To avoid this, you’ll want to use a brush with soft bristles to apply the joint compound. This will help to create a smooth, even surface.

Final Thoughts

Repairing drywall paper is a fairly simple process, but it does take some time and patience. Be sure to follow the steps above carefully and you’ll be able to fix your drywall in no time or without additional cost. If you still face problems, don’t hesitate to contact a professional for help. Experts can usually fix the problem quickly and efficiently.